SECTION ROLLING PROCEDURE

Leave a Comment

Operator: Click to Expand Our operators have a minimum of one to two years’ experience. They also need to know maintenance requirements and operation of the equipment.  The forming process requires one or two persons depending on the weight of part. One experienced operator or a helper. This is machine can be ran by one […]

PLATE ROLLING PROCEDURE

Leave a Comment

Operator: Our operators have a minimum of one to two years’ experience. They also need to know maintenance requirements and operation of the equipment.  The forming process requires one or two persons depending on the weight of part. One experienced operator or a helper. This is machine can be ran by one or two persons. […]

INDUCTION BENDING PROCEDURE

Leave a Comment

Operator: Click to Expand Our operators have a minimum of one to two years’ experience. They also need to know maintenance requirements and the operation of the equipment.  The forming process requires one or two persons depending on the weight of the part. One experienced operator or a helper. This is a machine that can […]

What is Mandrel Bending?

Leave a Comment

Mandrel bending is an industrial bending process used for Hollow Section Steel (HSS), in which the interior of the HSS is supported using a piece of tooling called a mandrel. In this process, the mandrel – a small metal shaft slightly smaller than the HSS inside – is placed inside the HSS, helping the operator […]

Have a Pipe Rolling or Beam Bending Job?

Contact Us Now